Watersnake DSB SERIES, Руководство пользователя, Страница: 7 / 8

2: Check to see propeller is secure and not damaged.
3: Check shaft to ensure it is not bent. Detach
propeller and run motor visually to ensure shaft
is not shaking. If shaft is damaged contact your
retailer.
Loss of speed setting 1: Check all wiring connections.
2: Speed coil in motor may be burned,
contact your retailer.
Tight steering 1: Loosen counterforce screw, apply lubricant
and readjust.
For problems not listed contact your retailer
MAINTENANCE
At the end of the day, wipe the motor down with a cloth soaked in warm water and
then rinse unit with light spray from hose. Always check the propeller is clear of line
or weed, regularly check all nuts, bolts and screws and lubricate all moving parts with
an aerosol lubricant. Clean terminal connections regularly and check for frayed wires or
loose connections.
STORAGE
When storing the motor, lubricate all moving parts and screws and store in a well-
ventilated, dry area. Do not leave the motor outside in winter for long periods, as this
will damage the permanent magnet in the unit.
JARVIS WALKER – 12 MONTH WARRANTY PROVISIONS
1. Product safety
Provision of the goods by Jarvis Walker in no way reduces the purchaser’s obligation to ensure that their use of
the goods and the relevant operating environment is safe and in accordance with Jarvis Walker’s directions
relating to care, maintenance and storage of the goods.
2. Product warranty
All goods manufactured by Jarvis Walker that have been subjected to normal and proper use are warranted to be
free from material defects in material and workmanship for a period of one year from the date of purchase.
Jarvis Walker will use its reasonable endeavours to rectify at its cost any defect in the goods as provided in clause
2(a) notifi ed to it during the warranty period.
The purchaser’s sole remedy for a breach of clause 2(a) is the repair, replacement or resupply of the goods in
accordance with clause 3.4.
Jarvis Walker will not be liable to rectify any defect in the goods if:
the goods have been altered or modifi ed without Jarvis Walker’s authorisation;
the defect is the result of or related to a failure of the purchaser to comply with any of its obligations under
these terms; or the defect is the result of or related to the use of the goods other than in accordance with this
documentation or Jarvis Walker’s reasonable recommendations or directions.