Watersnake Advance Brushless SWBL 95/42, Руководство пользователя

Страница: 3 / 32

www.watersnake.com.au
3
PRE INSTALLATION CHECKLIST
MODEL SWS 70/36
(ADVANCE BRUSHLESS)
VOLTAGE (V) 12
MAX.THURST (LB) 70
SHAFT LENGTH (IN) 36
MIN AMP DRAW (A/H) 5
MAX AMP DRAW (A/H) 50
PROP 3 BLADE
FOOT CONTROL N/A
REMOTE HAND CONTROL N/A
MOUNTING ALLOY TRANSOM MOUNT
CIRCUIT BREAKER N/A
REQUIRED BATTERY 12v DEEP CYCLE MARINE
MIN. RECOMMENDED BATTERY SIZE 80 - 100 AMP HOUR **
• Familiarise yourself with the user manual and the various parts of your
Watersnake motor
• Select desired mounting location on boat
• Deep cycle marine battery (your Watersnake motor is not designed for use
with car / truck / motorcycle type batteries) – for more information about
appropriate batteries for your Watersnake motor, refer to page 10
• Check battery cable length in relation to location of your deep cycle
battery. If extension to battery cable is required, refer to table on page 10
NOTE – if extending battery cable ensure that the circuit breaker ( If your
motor is equiped with one. ) remains in place on the positive wire
PRE-USE CHECKLIST – CHECK BEFORE EACH USE
• Ensure that your Watersnake motor is securely attached to your boat
(refer to page 4 of manual)
• Fully charged deep cycle marine batteries (your Watersnake motor is not
designed to be used with a car / truck / motorcycle type batteries)
• Check battery cable for any signs of damage or exposed wiring
• Check terminals for any signs of corrosion or debris
• Check fuse assembly / circuit breaker – clean if any signs of corrosion or
debris. Replace fuse if necessary. ( If your motor is equiped with one. )