Watersavers WLDS-10 Mk3, Установка и пусконаладка

Страница: 15 / 20

6-MONITORING SCREENS
PEAK NUMBER OF LITRES
Example only
This screen stores the peak value measured during both High flow and Low flow time
periods. The asterisk shows the current HF/LF status.
Press
▼ or ▲
key to return to the Main screen.
NB THESE READINGS WILL REMAIN UNTIL RESET – SEE NOTE BELOW
NB Using your readings from the above screens add a safety margin of
10-15% for the maximum flow parameters. eg if your peak reading is
150 litres then enter 165 - 173 litres as the maximum.
RESETTING PEAK READINGS
To reset these readings press and hold the 0 key for 4 seconds while this screen is
active. This must be done following an alarm event or before a repeat test week is
carried out.
K P E A
K P E A
0 0 L 0 6
0 0 0 L 0 1
H F
L F
* 1