Before installing the product, disassemble the
mind-connecting point of the product and take out
the cartridge placed inside the product.
Remove the sticker placed under the lower
portion of the cartridge as shown in the
image.
Assemble the product as shown in the image.
The cartridge with its sticker removed is placed on
the lower portion of the product. Here, there may
be a pushing effect by self-magnetism, but this
means that the product has been assembled
properly.
Disassemble your current showerhead as shown in the image.
6
How to install the product
Assemble so that there are no leaks after making
sure that the leak- preventive O-ring has been
placed properly in the mid-connecting point.
Here, make sure that the O-ring of your showerhead does
not get lost.
In the case of difficulty, it is
easier if held and twisted
using rubber gloves or other
utility tools.
