Attention:
The Bus SAT/IN Module may be used for IN VITRO diagnostic applications.
This is a highly sensitive instrument. Read this installation manual before use.
When using the instrument, follow generally accepted procedures for quality control and
methods development.
If you observe a change in the retention of a particular compound, in the resolution
between two compounds, or in peak shape, immediately take steps to determine the
reason for the changes. Until you determine the cause of a change, do not rely upon the
results of the separations.
Attention:
This equipment generates and uses radio frequency energy. If not installed
and used strictly in accordance with the user’s guide, it may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to cause
interference, in which case you must take measures to correct the interference at your own
expense.
Attention:
To meet the regulatory requirements of immunity from external
electrical disturbances that may affect the performance of this instrument, do not
use cables longer than 9.8 feet (3 meters) when you make connections to the
screw-type barrier terminal strips. In addition, ensure you always connect the
shield of the cable to chassis ground at one instrument only.
The Installation Category (Overvoltage Category) for this instrument is Level II. The Level
II category pertains to equipment that receives its electrical power from a local level, such
as an electrical wall outlet.
STOP
STOP
STOP
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
