ES-CUTP and ES-FUTP Manual
Page 3
Packaging
Enclosure: Rugged high-strength sheet metal. Designed for mounting on wall or on shelf or
desk. Can also be set on desk, desk or tabletop.
Dimensions: 10.5 x 8.5 x 1.5 in. (26.7 x 21.6 x 3.8 cm)
Weight: 5.4 lb. (2.45 kg.)
Cooling method: Convection
LED Indicators
PWR: Steady On when power applied
ERROR: Self-test at power up failed
SPEED (with LINK ON): ON = 100Mbps; OFF = 10 Mbps
LINK/ACT: Steady On for LINK with no traffic, blinking indicates port is transmitting/receiving.
F/H: ON = full-duplex, OFF = half-duplex
Agency
Approvals
UL Listed (UL 1950), cUL, CE
Emissions: meets FCC Part 15, Class B
Warranty:
Limited lifetime; Made in USA
1.2 Ordering
Information
ES-FUTP-8 with a 100Mbps Fiber Port
ES-FUTP-8 (SC):
8-port switch with one 100Mbps switched fiber port (multi-mode SC-type
connector), and seven “N-way” half- or full-duplex switched RJ45 10/100 auto-
negotiating ports. Includes store-and-forward switching that filters and forwards data
moving between the ports. The internal switch has 16K nodes address table and
1MB packet buffers. External power supply.
ES-FUTP-8 (ST):
Same as ES-FUTP-8 but with multi-mode ST- type fiber connector.
ES-FUTP-8 (MTRJ):
Same as ES-FUTP-8 but with multi-mode MTRJ-type fiber connector.
ES-CUTP-8 with all copper ports
ES-CUTP-8:
8-port 10/100Mbps switch with eight 10/100 N-way auto-negotiating switched
ports. Includes store-and-forward switching that filters and forwards data moving
between the ports. The internal switch has 16K nodes address table and 1MB packet
buffers. External power supply.
Waters Network Systems reserves the right to change product specifications and/or model offerings without
notice.
2.0 INTRODUCTION
2.1
Inspecting the Package and Product
Examine the shipping container for obvious damage prior to installing this product; notify the
carrier of any damage that you believe occurred during shipment or delivery. Inspect the contents of this
package for any signs of damage and ensure that the items listed below are included.
This package should contain:
1 ES-CUTP-8 or ES-FUTP-8;
1 External Power Supply, 5VDC, 115v 60Hz
1 Installation and User Guide
Remove the switch from the shipping container. Be sure to keep the shipping container should
you need to ship the unit at a later date.
In the event there are items missing or damaged, contact Waters Network Systems’ Customer
Service at 800-328-2275. If you need to return the unit, use the original shipping container. Refer to
Chapter 5, Troubleshooting, for specific return procedures.
