Waterproof Drysuite Owners Manual
Page 5 of 10
WATERPROOF DRYSUIT OWNER’S MANUAL
Before Diving:
Inspect the latex seals for damage. Pay particular attention to making sure that edges of the
seals are not cracked or torn. If they are, it could indicate that the seals are damaged and could
fail. Damaged seals should be replaced before diving with the suit. Cuff rings for quick "in the
field" replacement of latex seals are available from your Waterproof dealer and are a helpful
addition to a "save a dive" kit.
• Make sure you have removed watches, rings, or any jewelry with sharp points prior to
donning the suit. Do not wear anything which could catch the seals and tear them.
• Make sure the zipper is lubricated. Use wax lubricants only, DO NOT use silicone, silicone
sprays, or petroleum based lubricants. These products will damage the zipper and the suit.
Check the teeth to make sure they are in good condition and that the slider operates freely.
• Lubricate the seals to ease entry into the suit. In a dry environment, unscented talc makes a
good lubricant. In a wet environment (rain or small boat) many divers prefer to carry a small
bottle of a water based lubricant such as a weak soap solution or shaving cream. DO NOT use
silicone or petroleum based lubricants, even those promoted for drysuit seals, as they will
damage the suit.
• When donning the suit make very sure that the undergarments do not catch in the zipper.
Pulling the zipper closed over on obstruction can break the zipper.
• Make sure both valves are securely screwed into the suit. Ensure that the inflator valve and
exhaust valve work properly by operating them before every entry into the water.
