WaterPORT DAY TANK, Руководство пользователя, Страница: 13 / 16

Add hot water:
To add hot water simply unscrew your 2” cap and add hot water from your home faucet.
Fasten the cap and re-pressurize the tank by using the schrader valve and a bike pump.
The Insulated tank will keep water hot up to 4 hours.
Keeping water cold for drinking:
The Day Tank’s 2” cap is large enough for ice fill. The insulated tank will keep ice up
to 4 hours.
Sunlight can be used as a heat source:
Place your tank in direct sunlight for 2-3 hours. Your tank’s water temperature will
increase by 10-15 degrees Fahrenheit.
Soap is your friend:
We recommend cleaning your system after every other use. To clean your system, add
a few drops of dish soap through the top cap. Next, flush your system with your garden
hose to be sure all soap has been removed. You may need to repeat the process to ensure
the tank has been fully sanitized.
Adding additional pressure:
Locate the schrader valve on the side of the tank. Attach a bike pump or compressor, and
pump air into the tank.
Do not Exceed 40 PSI.
You can add any potable liquid:
Your Day Tank can handle any potable liquid. From water to sports drinks, you now have
the ultimate on board liquid dispensing system!
additional information
pro tips
Check out our accessories at www.theWaterPORT.com