66
Important! Turn Water Flosser off and charge for 24 hours before first use.
Plug the cord into any standard electrical outlet. Make sure you push the switch into the OFF (0) position before charging. The unit
will not charge if the switch is in the ON (I) position. See “Cleaning and Troubleshooting Your Waterpik® Water Flosser” for guidance
on how to look after your battery. The Waterpik® Water Flosser will stay charged for up to 2 weeks depending on use.
Filling the Reservoir
Disconnect charging cord from the unit prior to filling the reservoir and product use. Lift flip top on reservoir and fill the reservoir
with lukewarm water.
Inserting and Removing Tips
Insert tip into the center of the knob at the top of the Water Flosser handle.
The colored ring will be flush with the end of the knob if the tip is correctly
locked into place.
To remove the tip from the handle, press the tip eject button and pull tip from the handle.
CAUTION: Do not press tip eject button while unit is running.
Adjusting the Pressure Setting
You can adjust the pressure setting on your Water Flosser by simply sliding the pressure switch on the handle.
Eject
Fill
Pressure
Setting
GETTING STARTED
