Waterpik WP-100 Series, Инструкции по уходу, Страница: 4 / 6

Soak the handle of countertop units in white vinegar for 5-7 minutes.
Step 4: Clean the Flosser Tip

Remove the tip from the unit using the eject button.

Soak the Water Flosser tip in a container of hydrogen peroxide or white vinegar for 5-7 minutes.

Rinse the tip under warm water.

For maximum effectiveness over time, we recommend replacing Water Flosser tips every 3-6
months. The tips can become clogged and/or affected by mineral deposits.
Soak the flosser tip in white vinegar for 5-7 minutes.
It's easy to keep your Waterpik
®
Water Flosser clean so you continue to get the maximum benefit for
your oral health.
What To Do About Low Pressure in Your Water Flosser
By Jerry C.
May 11, 2017
If you’re experiencing low pressure in your Water Flosser, try following these steps to improve
performance.
Clean Your Jet Tips
How to clean your Water Flosser Jet Tips:
1. Remove the Water Flosser tip from the unit using the eject button.
2. Soak the tip in a container of hydrogen peroxide or white vinegar for 5-7 minutes.
3. Rinse the tip under warm water.
Note: For maximum effectiveness, replace Water Flosser tips every 3-6 months as the tips can become
clogged and/or affected by mineral deposits.