ON
OF
F
Quick Start Guide
1
GETTING STARTED
Connect the charger cord to the USB
power supply. Plug the power supply
into the wall outlet and connect
magnetic charger to unit and charge
for approximately 5 hours.
Remove the reservoir and ÿll with
water. Replace reservoir and press
down ÿrmly.
Insert tip into the Water Flosser
handle, pressing down ÿrmly until it
clicks into place.
PRIMING UNIT (FIRST TIME USE ONLY)
Set pressure control on base to high
(pressure setting No.10), point the
handle and tip into sink. Turn power
and water ON until water ˜ows
from the tip. Turn both power and
water OFF.
FILL
ON
ON
INSERT
EJECT
CHARGE
HIGH
• 2 • 4 • 6 • 8 • 10
POWER
ON
3
ADJUSTING THE PRESSURE SETTING
Turn the pressure control on the base of the unit
to the lowest setting (pressure setting No.1) for
ÿrst-time use. Gradually increase pressure over
time to the setting you prefer – or as instructed
by your dental professional.
4
USING THE WATER FLOSSER
With unit OFF, place tip in mouth. Start on
low pressure. Turn power ON and water ON.
Adjust pressure to your liking.
Lean over sink. Close lips enough to
prevent splashing.
TIP: TO AVOID MESS KEEP TIP
IN MOUTH WHILE UNIT IS ON.
LOW
• 2 • 4 • 6 • 8 • 10
5
Aim water at the gumline at a 90
degree angle. Follow the gumline and
pause brie˜y between teeth.
NEED HELP?
Visit
Waterpik.com/WelcomeWF
To watch a How To Video and ÿnd additional product support.
Call Us!
1-800-525-2774
Canadian customers please visit
www.Waterpik.ca
for more information.
2