Waterpik Complete Care 9.0, Руководство пользователя

Страница: 10 / 16

10
CLEANING AND TROUBLESHOOTING YOUR WATERPIK ® WATER FLOSSER
ON
Using Mouthwash and Other Solutions
Your Waterpik® Water Flosser can be used to deliver mouthwash and antibacterial
solutions. Afer using any special solution, rinse unit to prevent clogging by partially
flling reservoir with warm water and running unit with tip pointed into sink until unit
is empty.
Cleaning
Before cleaning, unplug from the electrical outlet. Clean the product when
necessary by using a sof cloth and mild non-abrasive cleanser. The water reservoir
is removable for easy cleaning and is top rack dishwasher safe.
Removing Hard Water Deposits / General Cleaning
Hard water deposits may build up in your unit, depending on the mineral content
of your water. If lef unattended, it can hinder performance. Cleaning internal
parts: add 2 tablespoons of white vinegar to a full reservoir of warm water. Point
the handle and tip into sink. Turn unit ON and run until reservoir is empty. Rinse by
repeating with a full reservoir of clean warm water.
This process should be done every 1 to 3 months to ensure optimal performance.
Leakage
If leaking due to a damaged hose, replacement hoses and handles can be purchased
at www.waterpik.com or contact Water Pik Inc. customer service for a self service
repair kit.
Service Maintenance
Waterpik® Water Flossers have no consumer serviceable electrical items and
do not require routine service maintenance. For all accessories go to
www.waterpik.com. You may also call our toll-free customer service number at
1-800-525-2774 (USA) or 1-888-226-3042 (Canada). Refer to the serial and model
numbers in all correspondence. These numbers are located on the bottom of
your unit.
Still have questions? Go to www.waterpik.com.