Waterous ECLIPSE CAFSystem 2.0, Инструкции по установке, эксплуатации и обслуживанию

Страница: 30 / 44

Safety Introduction Product Overview Installation Operation Maintenance Troubleshooting Warranty
30 | 44
Operation Overview
The system can operate in several pumping modes; water only, water with foam solution only, water with foam solution and compressed air, and (where
regulations permit) compressed air only.
Hot Liquid
Certain operating conditions will cause the solution temperature to
reach and exceed 160 °F (71 °C).
Do not operate if the water
temperature exceeds
160ºF (71ºC).
Hot liquid can scald you.
Hot Liquid
•
•
Avoid conditions the result it high temperature solution. Do not
operate when solution temperature exceeds 160 °F (71 °C).
Hot Surface
Components in the system become hot during operation. Allow
components to cool after operation. Do not place equipment on the
module cover.
Do not touch the surface
during operation––allow
it to cool after operating.
Hot surface can burn you.
Hot Surface
•
•
Do not touch the hot components and allow components to cool
before handling. Never place anything on the top panel.