4
|
64
Safety Precautions
•
Read and understand this document before you begin the installation.
•
Read and understand all the notices and safety precautions.
•
Be aware that these instructions are only guidelines and are not meant to
be definitive. Contact Waterous when you have questions about installing or
operating this equipment.
•
Do not install this equipment if you are not familiar with the tools and skills
needed to safely perform required procedures—proper installation is the
responsibility of the purchaser.
•
Do not operate the equipment when safety guards are removed.
•
Do not modify the equipment.
•
Regularly check for leaks, worn, or deteriorated parts.
•
Waterous reserves the right to make modifications to the system without
notice.
NOTICE
Before operating the
AQUIS™ Foam
Proportioning System:
Refer to instruction
F-1031-2447 for
detailed information.
• Check the foam pump oil level
and fill if necessary.
• Remove the foam pump
shipping plug and replace it
with the vented oil cap.
NOTICE
High current from welding
or jump start can damage
electronic components.
•
Disconnect all ground
wire connections before
jumping or welding.
•
High Current
