REV.:002 06/2018FF
Quick Start Guide Bluetooth Music Receiver WM-BT08
Compatible with the following models
:
AUDI:
Chorus 2, Concert 1/2, Delta, Symphony 1/2, Navigation Plus 1/2
VW:
Alpha 5, Beta 5, Gamma, Gamma CD, Premium 5/6, Premier 4, MCD Navi, MFD Navi
SKODA:
MFD Navi, MS 303, MS 501, MS 502, Symphony CD & Kassette
SEAT:
Alana, Aura, Aura CD, Elba, Lena, Liceo, Scala, MFD
Connect the Adapter
:
1. Remove The Radio.
2. Connect the included adapter (WM-4696) to the Bluetooth adapter WM-BT07. In the
following called WM-BT08.
3. Insert the blue plug of the adapter into chamber C3 (marked blue in the picture).
4. If necessary, remove the blue connector from the yellow-green-blue connector
combination and attach the blue connector of the WM-BT08 instead.
5. With a CD changer already connected in chamber C3 (blue), it is thus removed and
can no longer be used in the system.
6. If you have installed a black 20-pin connector in the vehicle, you will also need the
adapter WM-4693 (mini-ISO adapter / extension). This can be ordered in our online
shop at www.wm-outlet-store.de.
7. Now connect the black ground cable with the eyelet either to the radio housing or
the black cable directly to a ground line to the Quadlock plug. Without a good
ground connection, the function of the adapter is not given.
8. Establish a Bluetooth connection by activating Bluetooth pairing and searching for
the `` WM` 'Bluetooth device. You should then set the volume to full volume on the
connected device.
9. Before reinstalling the radio, test the function of the adapter. Switch on the AUX
function with the CD changer button.
Has something been left unclear? You can reach us MO-FR, from 8-17 o'clock
under the E-Mail: [email protected]
