Installation Instructions
ST1 Tap
–
Introduction
The ST1 tap does not replace an existing tap, but augments it with functionality
for dispensing filtered chilled, filtered ambient and filtered chilled sparkling water.
ST1 Tap Operation
Certain ST1 tap models may have a “sleep” mode. This
mode is indicated by the
blue LED light (Figure 6:
Touch panel buttons and colours - ST1 tap
). Press the
desired button once and the LED light will change from blue to green to indicate
that the tap is ready. Press the button again to start dispensing water.
Figure 6:
Touch panel buttons and colours - ST1 tap
Copyright Sodatap© 2023 Page 11 STM1 Manual V10
