Watermark Puretec DF15, Руководство пользователя

Страница: 9 / 16

9 Copyright © Puretec Pty Ltd 2022 Puretec D15 & D35 User Guide
Operation & Maintenance
Operation & Maintenance
• Frequently clean the fountain using warm soapy water. Avoid all abrasive and corrosive
cleaning materials.
• Do not pour any waste cleaning water down the drain to avoid blocking the drain trap.
• If the chiller is not used (e.g. more than 3 days) the power can be switched off to
conserve energy.
• We recommend that the fountain is cleaned after any period of disuse.
• It will be necessary to change the filter after an extended period of disuse (e.g. more
than 2 weeks).
• Keep the area surrounding the fountain clean and dry. In the event of any leakages,
switch off the water and power and call Puretec.
Cartridge Changeout
Replacement cartridge code for DF Series systems: Z1-R
1. Turn off the water supply at an external shut off valve.
2. Remove the front access panel.
3. Remove all packaging from the new cartridge, including any wraps or caps (if
applicable).
4. Rotate the old cartridge counter-clockwise 1/4 turn, pull it out and dispose of it.
5. Insert the new cartridge into the filter head and rotate clockwise 1/4 turn.
6. Turn on the water supply and check for leaks.
7. If leaks occur, repeat step 2 & 3.
8. If leaks persist discontinue use and call Puretec.
9. Open the quarter turn spindle on the carafe filler until water dispenses and then run
the water for 1 minute to clear air pockets and flush the filter.
10. Replace the front access panel.