Watermaid ecoblend Скачать руководство пользователя страница 20

Страница: 20 / 38

- 18 -

Version 20170223

6.6

History Menu

The history menu provides useful technical information to the manufacturer and/or service personnel. This

menu is a read-only menu and there are no user adjustable settings.

History Menu

1. Press MENU.

2. Use the

▼

button to scroll to "

History".

3. Press ENTER.

4. Press MENU twice to return to the home screen.

6.7

LCD Settings

The LCD (Liquid Crystal Display) screen can be adjusted to suit personal preferences in terms of contrast and

background colour. Firstly, the contrast can be adjusted up or down to suit ambient lighting levels. Secondly,

the display colours can be inverted from the factory pre-set of dark blue characters on a light blue background

to light blue characters on a dark blue background.

The following table details the process for altering the display.

Step

Action

Display

Press MENU to display the "MAIN MENU" and use the

▼

button to

scroll past "Statistics" to the second page to position the cursor on

"LCD Settings".

Press ENTER and the "LCD Settings" menu will be displayed. With
the cursor positioned on "LCD Contrast", press ENTER to adjust this
setting.

The current setting will be highlighted. Press the

▲

and

▼

buttons

to adjust the contrast. Each time these buttons are pressed, the
display contrast will adjust accordingly. Once the desired contrast
level has been reached, press ENTER to save.

Either press MENU twice to return to the home screen or press the

▼

button to highlight "Invert". To invert the display colours, press

ENTER. To return to the original setting, press the

▼

button and

press ENTER again. Once set, press MENU twice to return to the
home screen.

Содержание ecoblend







































Результаты поиска

Содержание ecoblend

Отзывы:

Watermaid ecoblend, Руководство пользователя, Страница: 20 / 38

Результаты поиска

Содержание ecoblend

Отзывы: