WL290
Manual
Page 59 Revision 9‐3‐2019
RESETTING THE TWO HOT TANK OVERLOAD DEVICES (HIGH LIMIT SAFETY)
1.
Turn off Red Heater and Compressor Power Switch
O = OFF
on rear of unit.
2.
Unplug the Power Cord from rear of unit.
3.
Remove 4 Phillip Screws from the Access Panel on rear of unit
and Lower Access Panel.
4.
Locate protective metal box on rear of Hot Tank. Push down on top of metal box to
access the two Overload Reset Devices.
5.
Press the Overload Reset Devices.
6.
Reattach the metal box by depressing the top flap of the metal box so it snaps back into
its original position on the Hot Tank.
