WATERKOTTE Basic Line BS 7010 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 60

WATERKOTTE Basic Line BS 7010 Скачать руководство пользователя страница 2

21.10.2015

2 / 60

Copyright



2014 by: WATERKOTTE GmbH. Subject to changes.

Copyright



2014 by

WATERKOTTE GmbH

Gewerkenstraße 15, 44628 Herne, Germany

All rights reserved. Reproduction, duplication as well as translation of this
publication, or excerpts therefrom, require prior written approval by
WATERKOTTE GmbH.

Illustrations and diagrams serve as explanatory description and shall not be
used as drawings for construction, offers or installation.

All specifications comply with the state of technology at time of printing; we
reserve the right to make changes that serve technical progress.

This publication has been prepared with all reasonable care.
WATERKOTTE GmbH does not assume any liability for remaining errors or
omissions, or for possible damages.

Note: This symbol applies only to countries within the European Union (EU).

This symbol is in compliance with Directive 2002/96/EC, Article 10. The
product has been designed and manufactured with high-quality materials
and components which are suitable for recycling.

This symbol means that electrical and electronic equipment, at the end of
its useful life, shall be disposed of separately from household waste. Please
dispose of this equipment at your designated collection point or local recy-
cling centre.

In the European Union, different collection systems are available for used
electrical and electronic equipment. Please help us conserve the environ-
ment we live in!

Never vent R410A into the atmosphere:
R410A is a fluorinated greenhouse gas according to Kyoto Protocol and
has a global warming potential (GWP) of 1975.

«
1
2
3
4
...
»

Содержание Basic Line BS 7010





























































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды