WaterGroup 185HEDP, Руководство пользователя

Страница: 4 / 25

4
Specifications
Before Starting Installation
Tools, Pipe, and Fittings, Other Materials

Pliers

Screwdriver

Teflon tape

Razor knife

Two adjustable wrenches

Additional tools may be required if modifi-
cation to home plumbing is required.

Plastic inlet and outlet fittings are included
with the softener. To maintain full valve
flow, 3/4” or 1” pipes to and from the sof-
tener fittings are recommended. You
should maintain the same, or larger, pipe
size as the water supply pipe, up to the
softener inlet and outlet.

Use copper, brass, or PEX pipe and fittings.

Some codes may also allow PVC plastic
pipe.

ALWAYS install the included bypass valve,
or 3 shut-off valves. Bypass valves let you
turn off water to the softener for repairs if
needed, but still have water in the house
pipes.

5/8” OD drain line is needed for the valve
drain. A 10’ length of hose is included.
with some models.

A length of 5/8” OD drain line tubing is
needed for the brine tank over flow fitting
(optional).

Nugget or pellet water softener salt is
needed to fill the cabinet or brine tank.

Continuous operation at flow rates greater than the service flow rate may affect capacity and efficiency performance.

The manufacturer reserves the right to make product improvements which may deviate from the specifications and
Speci fi ca ons
WG185HEDP-100 WG185HEDP-150 WG185HEDP-200 WG185HEDP-250
2192
-1
2193
-1
2194
-1
2195
-1
Factory Se ngs
Salt Used ‐ Per Regenera on 12.0 lbs 18.0 lbs 24.0 lbs 30.0 lbs
Water Used ‐ Regenera on 86.4 gal 148 gal 162.4 gal 224.8 gal
Hardness Removal ‐ Grains
30,000 45,000 60,000 75,000
Tank #1 Resin Quan ty ‐ Cubic Feet 1.0
3
1.50
3
2.0
3
2.5
3
Tank #2 Resin Quan ty ‐ Cubic Feet 1.0
3
1.50
3
2.0
3
2.5
3
Tank Size 9x48 10x54 12x52 13x54
Tank Jacket / Media Loaded Yes Yes No No
Brine Tank / Cabinet Size (Inches)
20.3 x 37.4 23.0 x 40.5 23.0 x 40.5 23.0 x 40.5
Salt Storage Capacity 350 lbs 420 lbs 420 lbs 420 lbs
Flow Rate @ 15 psi Pressure Drop 7.2 gpm 7.4 gpm 9.0 gpm 9.2 gpm
Flow Rate @ 25 psi Pressure Drop 10.0 gpm 10.1 gpm 11.9 gpm 12.1 gpm
Back Wash Flow Rate 2.0 gpm 2.4 gpm 3.5 gpm 4.0 gpm
Shipping Weight
184 lbs 201 lbs 244 lbs 262 lbs
Regenera on Type Counter Current / Up Flow
Plumbing Connec ons Includes 3/4" 90°Elbows & 1" Straight NPT
Resin Type Canature 8% High Capacity Ion Exchange Resin
Electrical Requirements Input 120V 60 Hz ‐ Output 12V 650mA
Water Temperature Min 39 ‐ Max. 100 degrees Fahrenheit
Water Pressure Min. 20 ‐ Max. 125 psi