WaterFurnace OM1500MW, Руководство пользователя

Страница: 21 / 38

21
Symptom/Problem What You Can Do
Unit not operating. Check status/fault lights and thermostat.
Unit not heating or cooling adequately. Check filter, status/fault lights, and thermostat.
Unit just “hums” and doesn’t heat or cool. Disconnect power. Call for service.
Electric bills too high.
Is unit always in Emergency Heat?
Is thermostat set to Continuous Fan when using PSC blower?
One room is too cold/hot.
Check for closed registers and
disconnected duct.
Too much air flow. Check for closed registers in other areas.
Whistling noise coming from fan. Check filter.
Loop has been damaged. Turn off unit at breaker. Call for service.
Thermostat settings “mysteriously” change. Check setpoints for both heating and cooling.
Red LED on at thermostat.
Check status/fault lights on unit.
See thermostat instructions.
Red LED on or flashing at unit. Determine fault condition by noting which light is on.
Drain light is flashing. Check condensate pan and drain.
Troubleshooting
In the event that your unit is not functioning properly, check the fault lights and troubleshooting information below.
After determining that a service call is required, call your dealer for an appointment. When calling the dealer, it is
beneficial to provide your model number and indicate any fault lights that are "on" either at the unit or on the thermostat.
Troubleshooting Reference
TROUBLESHOOTING