Waterflex Fit's Pool WX-FITSPooL/2017, Инструкция по установке и эксплуатации

Страница: 37 / 52

37
English
6. INSTALLATIoN
6.6. Pool assembly
Step 1 : Installation
Assemble the product on a clean, flat and dry
surface.
Insert all 16 straight steel tubes
3
in the four
straight polystyrene panels
2
.
Step 2 : Positioning
Position the square panels as shown above.
The holes for the pump connectors must be fac-
ing up.
All panels have one side thicker than the other; it
must be placed towards the interior of the struc-
ture.
Step 3 : Assembly
Assemble the frame using the 16 stainless steel
L-shaped tubes as shown above.
Make sure the lock buttons are in place in their
slots.
To facilitate assembly, your structure must be into
two parts: three sides and two corners, and one
side and two angles (see photo).
Step 4 : Assembly (continued)
Place both parts face to face and assemble them
to form the complete frame.
Make sure the lock buttons are in place in their
slots before continuing.
Holes for the pump connectors