![Waterfall Audio S500EX Скачать руководство пользователя страница 4](http://html2.mh-extra.com/html/waterfall-audio/s500ex/s500ex_user-manual_5170205004.webp)
- 3 -
SECTION: CINEMA SET-UP - POWERING A SUB600S
Reminder:
Connections must be made with all electronics turned off.
•
Connect the SUB PREOUT output of the Audio-Video processor to the R input (10) in RCA
or (12) in XLR
•
Connect the power outputs (11) to the SUB600S
•
Set the Switch (5) to LFE
•
Adjust the volume with the potentiometer (8)
Points to note:
•
Potentiometer (5) FREQ is inactive. The amplifier operates in LFE mode; the cutoff frequency is
managed directly by the AV processor.
•
Depending on the “Bass Management” of the Audio-Video processor, phase inversion on the
Switch (6) may be necessary.
AUDIO-VIDEO PROCESSOR SETTINGS
In the "setup" menu of your A/V processor, configure all speakers in "small" mode.
Select the crossover frequency:
80Hz
Continue with the rest of the settings (distance, test tone, etc.). If necessary, refer to the user manual for
your Audio/Video amplifier.