- 2 -
UNPACKING AND INSTALLATION
STEP 1
Open and remove the upper
protective wedges then remove
the 4 screws holding the front
panel. Separate the front from
the back box.
STEP 2
Cut out the partition using the
template provided. Be sure to
check its horizontality before
starting cutting using a level.
Before any drilling operation,
always make sure to consult
the plans of the room to
ensure that there are no pipes,
electrical conduits or any
specific installations behind
the wall.
Before installing the back
box in the wall, connect the
speaker cable. Check the +
and - polarities.
Once the back box is in the
wall, screw the 4 latches for
permanent fixing.
Caution:
cross
screwing
recommended (see diagram).
1
2
3
4
