- 3 -
•
Set switch "LFE-12-24" (2) on "LFE". (note that "FREQ" (4) is not active
with this setting).
•
Depending on the filter of your A/V processor it might be necessary
to change phase to 180°(3). Choose the setting that provides the most
energy.
•
Set volume « level» (5) to your convenience.
Setup of the subwoofer’s amplifier
CONNECTION OF YOUR SUBWOOFER IN STEREO MODE
Connecting to your stereo amplifier
OPTION A
If your integrated amplifier
is equipped with a L&R
preout connect it via a
stereo cinch cable (not
supplied) to the low level
input (7) of the subwoofer.
Connect your speakers
directly to your stereo
amplifier.
STEREO
INTEGRATED
AMPLIFIER
4
5
3
2
Setup of your A/V Processor
In the setup menu of your AV amplifier « small » mode on all speakers
should be selected. Select the following crossover frequency:
•
80Hz for lguasçu Evo or Victoria Evo
•
120Hz for Hurricane Evo or Elora Evo
•
150Hz for Serio.
Finalize the complete set up (distance, test tone...). Please refer to your
A/V’s user manual or dealer if you need assistance.
7
8
9
Speaker
Speaker
Once connections are made, power up the subwoofer with mains switch
(10) on position «
ON
».
