Waterdrop WD-G3P800-W, Инструкция по эксплуатации, Страница: 14 / 28

1.Connect the RO faucet to the system: Insert the power cord, which is attached to
the RO faucet, into the “FAUCET” connector (Figure 17) and tighten the nut. The
faucet connector can be found at the back of the housing.
2.Connect the UV sterilizer to the system: Insert the power cord, which is attached
to the UV sterilizer , into the “ UV sterilizer ” connector (Figure 17) and tighten the
nut. The UV sterilizer connector can be found at the back of the housing.
NOTE:
The power connection of the faucet is just opposite to the power connection
of the UV sterilizer , and it cannot be inserted if it is reversed;
3.Connect Power Adapter: Insert the DC head of the power adapter into the
“POWER” port at the back of the housing (Figure 18).
Faucet plug
Power plug
UV sterilizer plug