Welcome to the WaterDog Adventure Gear® family and thank you for your purchase!
As excited as you and your dog are to begin using your WAG Boarding Steps, there are a few important actions to take
prior to use and for safe and enjoyable ongoing ownership.
Assembly Overview
Assembly
Tools Required: 1/2" socket driver, 3/4" socket driver, 3/16" hex driver, 5/16" hex driver
Your new WAG Boarding Steps come partially assembled from the factory. Hardware is inserted in the component
where it will be required. Carefully unpack contents of shipping carton to avoid damage or loss of hardware. All
stainless steel screws and bolts are pre-treated with ECK® Corrosion Protection Compound which also serves as an anti-
seizing agent.
Leg Cap (4)
Runner (4)
Step (12)
Upper Mounting Leg (2)
Upper Step Assembly
Mounting Plate (1)
Lower Mounting Leg (2)
Foot Pad (2)
Lower Step Assembly
Step 1
- Attach the Foot Pads to the tapped end of each Lower Mounting Leg using the two (2) 5/16-18NC button head
cap screws provided.
1/2-13NC Screw/Nut (4)
