i. Programming the digital clock. In the TIMe menu rotate the wheel until the
ClOCK menu is located, then press the wheel to access it.
I 23
electrochlor Mineral Chlorinator
Setting the time:
• Select hours or minutes, rotate the wheel to the desire value. Then press
to confirm. To confirm the time and exit rotate the will to the check
mark (
) and push to save the time.
• To exit without saving select X and press the wheel.
• rotate the wheel to select time, then press the wheel and rotate the
wheel to select the desire starting and finishing time. Press the wheel to
confirm the selection. To select the devices that will be activated, just
rotate the wheel to device and press to select. To deselect go to device
and press the wheel.
ii. Programming the Timer:
• Select desire Timer (1-4)
