background image

Maintenance

Although  the  Self-Cleaning  chlorinator  is  designed  to  greatly  reduce  the  need  to  clean  the  salt 

cell plates, inspection and removal of small calcium build up will be periodically required to insure 

correct performance.

Salt Cell Cleaning Procedure 

1.  Press the 

ON/OFF

 button on the power pack to turn the pump

and Electrochlor to standby mode.

2.  Unscrew the barrel unions from the salt cell and disconnect

the cables from the salt cell’s brass connectors.

 

 

3.  Turn the salt cell housing upside down with both ports facing 

upwards.

4.  Pour the Cell Wash cleaning solution into the housing to dissolve the calcium build-up from the 

salt cell plates. There should be just enough solution to cover the salt cell plates. 

5.  Allow enough time for the solution to dissolve the calcium build-up from the salt cell plates.

Approximately 5 to 10 minutes.

6.  Once the calcium build-up has been removed, pour out the Cell Wash solution into a bucket

and  lightly  rinse-off  excess  calcium  and  Cell  Wash  solution  from  the  salt  cell  assembly,  with 

fresh water.

7.  Reconnect the salt cell onto the filter system.

8.  Press the 

ON/OFF

 button on the power pack to reactivate the pump and Electrochlor.

 

Never  use  products  that  are  not  specifically  manufactured  to  clean  the  Electrochlor’s  salt 

cell.  Do  not  use  raw  acids  such  as  hydrochloric  acid.  This  will  damage  the  salt  cell  and 

severely shortens its life and will void warranty. Please consult your local pool professional 

for advice on salt cell cleaning products.

Advanced Programming

Program  the  chlorinator  timer  to  turn  on  or  off  at  any  time  that  suits  your  lifestyle.  7  Day  timer 

allows for settings on week days, week ends, any day or every day operation. 3 program settings 

are available.

You can program the Electrochlor for extra chlorination during the weekends and less chlorination 

during weekdays.

Electrochlor’s  operation  modes  are  controlled  by 

UP

  or 

Down

  keys.  You  can  scroll  through  the 

following operation modes.

TIMER

 – to run as programmed. 

MANUAL

 – to run non stop. 

OFF

 – to switch chlorinator off.

Содержание 25A













Отзывы: