WaterCare HS-10 Скачать руководство пользователя страница 3

www.watercare.co.uk

www.watercare.co.uk

4

5

This is a manufacturer’s warranty offering 12 months parts and labour 

cover on manufacturing faults.
Where possible all repairs will be carried out on site.

CONDITIONS:

- The warranty covers the water softener only and not adjoining pipework.
- Service calls are taken and made Monday to Friday 8.30am – 5.00pm.
- Warranty is for commercial installations only.
- No liability can be accepted for damage caused by the water softener or  

      

  ancillary pipework.
- Work carried out that is not covered by this warranty will be charged at our    

  standard call out and labour rates (please contact for full details).
- Water Softener registrations must be completed and within 21 days of  

 

  purchase, see page 11.

EXCLUSIONS:

- Any fault arising from incorrect installation of the softener against the  

 

  manufacturers installation instructions.
- Misuse damage or neglect.
- Freezing of softener, water pipes or drain pipes.
- High water pressure. Max 5 bar pressure, exceeding 5 bar will void warranty.

  

(WaterCare recommends fitting a pressure reducing valve should pressure exceed 3 bar)

- Blocking or kinking of supply or drain hoses.
- Interruption of electricity supply.
- Max temperature is 50°C. 

  

(If the temperature exceeds this, a Temperature Reducing Valve should be installed – can be    

 

  purchased through WaterCare. Temperature exceeding 50°C will void warranty)

The Labour section of this warranty may be covered by the company from 

whom the softener was purchased. Please contact them in the first instance.

INSTALLATION GUIDE

To-By-Pass softener in case of technical fault:  Close inlet and outlet isolation valve to 

softener and open By-pass valve on mains supply - Reverse to reconnect softener.

SOFT WATER 

TO SERVICE 

EQUIPMENT

CONTROL VALVE

13 AMP 

POWER SOCKET

INLET

Stop Tap on 

incoming 

main supply

Pressure 

Reducing Valve 

(PRV) if inlet 

water pressure 

exceeds 3 bar

Hard water 

supply for 

drinking water

Non-return valve

Inlet Valve (open)

Braided hoses

Inlet & outlet 

flexible

Outlet Valve

Bypass Valve 

(shut)

Trapped upstand 

or run drain hose 

to external gully

Overflow hose 

terminated 

through 

outside wall

Air gap

Drain clip

WARRANTY 

TERMS & CONDITIONS

DIRECT PURCHASES FROM WATERCARE DISTRIBUTORS

WATER SOFTENER

Содержание HS-10








Отзывы: