Multi Slider
–
User Manual
Copyright © 2021 Waterbird Systems GmbH
www.waterbird.at
- 10 -
4.3
Slide in the Rails
After the segments and the end pieces has been put together the rails can be slided in. For
this the rails are pushed in from one end segment through the whole track.
4.4
Installing the carriage
Before the rails are slid in completely, they shall be stopped approximately 50cm before
reaching the other end segment to allow the installation of the carriage.
The carriage needs to be mounted in the right direction as shown in the image below.
When looking to the carriage from the inner radius the motor must be on the left side of the
carriage.