Waterbird MS Swift, Руководство пользователя

Страница: 9 / 15

Multi Slider – User Manual
Copyright © 2021 Waterbird Systems GmbH
www.waterbird.at
- 7 -
4.3 Connecting the Cables
4.3.1 Supply
Connect white connector of the sliders power supply to the power cable that comes with your
slider. The other end of the power cable shall be connected to the D-Tap connector on the
carriage.
For strain relief use the included cable bracket and mount the power supply cable via a hook-
and-loop tape or cable tie.
After connecting the DC-side of the power supply the AC side can be connected to the mains
supply.
For this use a standard IEC 60320 C14 cable and connect it to a properly grounded wall socket.
4.3.2 Control line
The Multi Slider Swift comes with the XL Motion Controller. This controller allows to control
the slider movements via standard DMX 512 protocol or via Ethernet.
For details of the XL Motion Controller and its capabilities, please see the separate XL Motion
Controller User Manual available in the support section of
www.waterbird.at
Depending on your chosen way of control connect the DMX or RJ45 cable to the XL Motion
Controller mounted on the carriage and strain relief with the included cable bracket alongside
with the power cable.