HOW TO SET-UP AND FILL STORAGE TANK
PRODUCT INSTRUCTIONS
STEP 4
Remove cap from tank liner spout
and place filling hose into spout.
Remove faucet aerator and thread on
faucet adapter . Connect female end
of filling hose and begin to fill tank.
When done filling, replace liner cap
with adapter cap and close off with
garden hose cap .
CAUTION — Only fill with fresh water. Overfilling
may result in damage to liner, tank, or surrounding
items. Never leave unattended while filling.
CAUTION — When using the faucet adaptor kit to
connect directly to indoor or outdoor faucets:
install an approved backflow prevention device
(not-included) in accordance with the local code.
7
STEP 1
Unfold tank shell and insert
support panels .
3
2
STEP 2
Place support panels into corner of
tank shell and unfold into sides of
tank shell .
2
3
3
STEP 3
Insert tank liner and align corners of
tank liner with the corners of the tank
shell .
1
3
1
4
6
9
8
CAUTION!
DO NOT connect pump directly to a pressurized water source, such as an
inside or outside faucet. Incorrect use may result in damage or injury.
