5
hd
USER MANUAL
WATER WOLF UWC1.0
www.waterwolfhd.com
/waterwolfhd
1
2A
2B
4B
3B
3A
4A
1.
Steel bar
2A & 2B.
Tubes
3A & 3B.
Eyes
4A & 4B.
Collars
5.
Guide
5
HOW TO MOUNT THE CAMERA
5
The camera has several different mount options during fishing.
The two most applicable ones are:
1.
Artificial lure mount
2.
Surface float fishing mount
For more info on the mounting possibilities (i.e. as a bobber for surface
fishing or marker float mounting for vertical bottom views) please visit
www.waterwolfhd.com.
An overview of the mount fittings:
This mounting method is used for trolling or for casting artificial lures.
5.1. MOUNTING FOR ARTIFICIAL LURE FISHING
1.
The mainline is tied onto eye (3A) on steel bar (1).
2.
Tube (2A) and (2B) are pulled towards eyes (3A) and (3B).
3.
The steel bar (1) is inserted into the camera house guide (5), and tube (2A)
and (2B) are inserted from each side of the guide whereby firmly securing the
steel bar (1) into the camera house.
4.
Tie your leader onto the eye (3B) and the lure (on the other end).
5.
Pull the steel bar (1) so the eye (3B) is pulled through the collar (4A).
6.
Add a brass weight in collar (4B) if necessary. You can now turn on the
camera, attach the cap and start fishing.
Damages inflicted on the camera as a result of casting and
retrieving the camera are the sole responsibility of the owner!
5.2. MOUNTING FOR SURFACE FLOAT FISHING
This mount is used for float fishing with worms, live or dead bait,
bombarda fishing and surface fishing with floating bait.
1.
First do the same basic mounting that is used for artificial lures.
2.
The main line is inserted into the groove on the float and pulled down onto
the steel bar (1) until the eye (2A) is approximately in the middle of the float.
3.
The leader is tied on to the eye (2A), and you can now turn on the camera
and start fishing.
Water surface (up)
Mounted for lure fishing
Mounted for surface float fishing
Water surface (up)
For the ultimate level of water pressure resistance, do not just
plug in the cap, but give it a little twist as your insert it in the
camera house!
