Water Tech Reionator Pro Ultra RXU13 Скачать руководство пользователя страница 15

LIMITED LIFETIME WARRANTY

WaterTech Industries Residential

Water Tech Industries (WTI) hereby warrants said equipment, 

only to the original purchaser at the 

original installation location.
THIS WARRANTY PERIOD BEGINS

 at the time of initial installation and use. The warranty becomes 

valid 

upon registration of the equipment.

GENERAL PARAMETERS —

 This warranty applies only to systems installed on 

USA OR CANADIAN 

residential, municipal (city water) water supplies 

that meet US Environmental Protection Agency 

MCL standards (or similar).  REIONATOR PRO® ULTRA products installed outside these parameters, will have the 
Standard Product Warranty rather than the Limited Lifetime Warranty applied – see website watertech.com for 
details.

LIMITED LIFETIME WARRANTY ON CONDITIONER AND BRINE TANK —

 Water Tech Industries 

will replace or repair (at WTI option) any conditioner tank OR brine tank that becomes unusable because of leakage, 
corrosion or rupture due to manufacturers defect . All internal mechanical components are warranted for a 

period 

of five (5) years 

from date of installation.

LIMITED LIFETIME WARRANTY ON RESIN — 

The REIONATOR PRO®ULTRA has been equipped with the 

highest quality water treatment media (certified to NSF Standards).  If, upon factory inspection, the resin is found 
to be defective, Water Tech Industries will furnish replacement resin.  The resin warranty does not cover resins 
subjected to water containing greater than 3.0-ppm of free chlorine or chloramines or containing greater than 
1.0-ppm total Iron and/or Manganese.  Resin which has been fouled by iron, manganese, organics (or other 
contaminants not designed for treatment by the REIONATOR PRO®) is not covered.

LIMITED LIFETIME WARRANTY ON CONTROL VALVE —

 The REIONATOR PRO® ULTRA has been 

equipped with the highest quality water conditioning control valve available.  If, upon factory inspection, the control 
valve body or PC board is found to be defective, Water Tech Industries will furnish repair or replacement (at WTI 
option) of the control valve body and/or the PC board.  All internal mechanical components are warranted from 
manufacturers defect for a period of five (5) years from the date of installation.

EXCLUSIONS AND LIMITATION OF LIABILITY —

 Water Tech Industries' liability for special, incidental, 

or consequential damages is expressly disclaimed. In no event shall Water Tech Industries' liability exceed the 
obligation of repairing or replacing any part that becomes defective under valid warranty coverage as described 

above. Cosmetic damage that does not affect the process functionality of the equipment is not covered. Water 
Tech Industries makes every effort to ensure that all illustrations and specifications are correct. However, these 
do not imply a warranty that the product is merchantable or fit for a particular purpose, or that the product may 
not vary from the illustrations and specifications.

The warranty contained herein is in lieu of all other warranties, expressed or inferred, including any implied 
warranty of fitness for a particular purpose. Labor and transportation costs incidental to the delivery or 
replacement of parts other than WTI factory repairs are not covered under this warranty. In the event of a 
warranty replacement or repair, WTI will cover the cost of shipping the covered components. This warranty 
expressly excludes any system which has been damaged by accident, fire, flood, Act of God, abuse, neglect, 
freezing, excessive temperature (below 40° F or above 110° F.), inappropriate pressure (below 20 psi or above 
100 psi), misuse, alteration of product in any way by owner or installing company, product identification 
tampering, misapplication, installation or operation not consistent with WTI instructions and installation outside 
of applicable plumbing codes and local regulations.  Furthermore, this warranty expressly excludes any system 
which has been out of service for more than 90 days continuously.  Fulfillment of the warranty coverage by WTI 
is contingent on proper execution of the procedures set forth in the WTI Warranty RGA policy.  No person or 
representative is authorized to assume for Water Tech Industries any liability on its behalf, or in its name, except 
to refer the purchaser to this warranty.  This warranty gives you specific legal rights, you may also have other 
rights which vary from state to state.

WHAT MUST YOU DO TO OBTAIN WARRANTY SERVICE —

 

The warranty registration 

(via phone or website) must be completed within ninety (90) days of installation to 
validate the REIONATOR PRO

® 

ULTRA Limited Lifetime Warranty.

  Units that have not been 

registered will be covered under the Standard 5/10 Year Product Warranty rather than the Limited Lifetime 
Warranty.  Repair work MUST be performed by an authorized Water Tech Dealer.  In the event that authorized 
dealer service is not available, defective components may be returned directly to Water Tech Industries with 
prior approval for warranty service. The registered owner must contact Water Tech for return instructions and 
return the defective component, freight prepaid, with proof-of-purchase, within the applicable warranty period.

Applicable to REIONATOR PRO

®

 ULTRA Model: RXU13

Содержание Reionator Pro Ultra RXU13

















Отзывы: