Water Specialist WS2H, Руководство пользователя

Страница: 16 / 60

Page 16 WS2H and WS3 Manual
SYSTEM SETUP 1
SYSTEM SETUP 3
SYSTEM SETUP 4
SYSTEM SETUP SCREENS
Accessed by pressing NEXT and DOWN simultaneously for >3 seconds and selecting
SYSTEM SETUP from the Main Menu.
• System setup screens will be locked on units determined to be a slaves of a system
- Slave units need to be reset, “Next” & “Regen” from any screen to have their slave
status turned off.
SYSTEM SETUP 1 – Select language
Select one of the available languages to be used when displaying text on the display.
SYSTEM SETUP 3 - Set number of units
Up to 16 units can be daisy chained using the communication in and out ports on the
controls.
SYSTEM SETUP 4 – Select System Type / Operation
This screen is only available if the number of units selected is greater than 1.
Series: All units are always online unless they are regenerating.
• Units in a series fl ow system will determine the need to regenerate based on:
- Any one unit reaching 0 capacity
- Day over ride
• Any one units need to regenerate will initiate sequential regenerations of all units (series
regeneration)
• Immediate systems will regenerate all unit in series upon the fi rst unit reaching 0 capacity
• Delayed units will regenerate during one or more of the delayed regeneration windows
Alternator: Operates the system as an alternator, having one unit off line at all times
either regenerating or fully regenerated.
• A unit in an alternator system will determine the need to regenerate based on:
- The current “lead” unit reaching 0 capacity
• Immediate systems immediately regenerate and alternate the exhausted unit with a
fully regenerated standby unit.
• Delayed systems will immediately alternate the exhausted unit with a fully regenerated
standby unit, and regenerate at the next available time slot.
- “Lead” unit regenerates based on “Lag” units
• The fi rst “lag” unit depleting down to 15% less than its ratio of system capacity
- 1/3 for a 4 unit; ½ for a 3 unit
- The second “lag” unit depleting down to 15% less than its ratio of system capacity
• 2/3 for a 4 unit
SYSTEM SETUP 2
SYSTEM SETUP 2 - Set unit of measure
Select either Metric units or US units for measurements.
SYSTEM SETUP 3A - Enable or disable Modbus
Enable or disable the Modbus communication protocol.