Water Specialist WS1TT, Чертежи и руководство по обслуживанию

Страница: 2 / 36

Page 2 WS1TT Drawings and Service Manual
We have had a number of instances where customers have incorrectly installed the in/out head to the untreated
water inlet/treated water outlet of the control valve
, rather than to the 2nd tank connection ports.
Below are a number of situations that will occur when the in/out head is incorrectly installed to the untreated
water inlet/treated water outlet of the control valve.
1) When “A” is in the draw cycle it will not draw brine and will put water into the salt tank. The “B” tank will
draw properly.
2) When “B” is in the backwash cycle, “A” will have no fl ow to service.
3) The transfer disc seals may be forced out of their cavities on the back/motor side of the transfer discs, and
it is possible that one of the seals could get pushed up into the valve and get stuck in the top of tank port of
the spacer stack assembly.
Twin Valve Installation Tips: