2
SPECIFICATIONS
Power supply required ................................................................................................. 115V, 60 HZ
Water temperature range .................................................................................... Max. 113°F (45°C)
Individual branch circuit required ......................................................................... 15 Amp minimum
Operating water depth
– beginning minimum.......................................................................... 1/4 in.
Inlet & discharge connection ................................................................... 3/4 in. garden hose thread
Discharge hose diameter ..................................................................................5/8 in. minimum I.D.
Discharge hose length .................................................. 50 ft. maximum recommended hose length
Motor ...................................................................................................... Series wound (Brush type)
Power cord .................................................................................................. SJTW, 16AWG/3C, 8 ft.
CONSTRUCTION
Motor housing ............................................................................................................ Thermoplastic
Pump housing .................................................................................................................... Cast iron
Impeller ...................................................................................................................... Thermoplastic
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product. If you have any questions regarding the product, please call customer service at
1-800-346-7611, 8 a.m. - 5 p.m., EST, Monday - Friday.
WARNING
• Always make sure the pump is unplugged as soon as the water level reaches 1/4 in. when using
the suction strainer. At water levels less than 1/4 in., the pump is attempting to pump air, which
will cause the pump to overheat. Running the pump without sufficient water will damage the
pump and void the pump
’s warranty.
• Do not pump flammable or explosive liquids such as oil, gasoline, kerosene, ethanol, etc. Do not
use in the presence of flammable or explosive vapors. Using this pump with or near flammable
liquids can cause an explosion or fire, resulting in property damage, serious personal injury
and/or death.
• Always disconnect the pump from its power source before inspection.
• Do not stand in water when the pump is connected. Do not handle the pump with wet hands.
• Do not touch the pump housing while it is operating, as the pump may be HOT and can
cause serious skin burns.
• Do not disassemble the motor housing. This pump has NO repairable internal parts,
and disassembling may cause dangerous electrical wiring issues.
