Water Right ASP1-1044, Инструкция по установке и руководство пользователя

Страница: 27 / 28

26 27
MANUAL REGENERATION
NOTE:
For softeners, if brine tank does
not contain salt, fill with salt and wait
at least two hours before regeneration.
If you need to initiate a manual
regeneration, either immediately, or the
same night at the preprogrammed time
for regeneration (typically 2:00 AM),
complete the following steps.
For Immediate Regeneration:
Press and hold ����� until valve motor starts (typically 3 seconds).
For Regeneration the same night:
Press and release ����� (notice that flashing “REGEN TODAY” appears).
ERROR
If the display toggles between “Error”
and an error code (i.e. a number), call a
service technician and report the error
code.
BYPASS VALVE OPERATION
To shut off water to the system, position arrow handles as shown in
the bypass operation diagram below. If your valve doesn’t look like the
diagram below, contact your service technician for instructions on how to
shut off water.
REGEN TODAY MON
GPM
2:40 8
PM
REGEN TODAY
and
TIME OF DAY
will flash alternately if a regeneration
is expected tonight.
“TREATED”
WATER EXITS
SUPPLY
WATER ENTERS
SUPPLY
WATER EXITS
SUPPLY
WATER ENTERS
NORMAL OPERATION BYPASS OPERATION
ERROR
106
CALL FOR SERVICE
ADJUST HARDNESS, DAYS BETWEEN REGENERATION, TIME OF REGENERATION AND ALARM BUZZER
For initial set-up or to make adjustments, please complete the following steps.
QUICK REFERENCE GUIDE
GENERAL OPERATION
When the system is operating, one of five displays will be shown: time of
day/gpm, flow rate, capacity remaining or days to a regen. Pressing
����
will toggle between the five choices.
TO SET TIME OF DAY
In the event of a prolonged power outage, time of day flashes, indicating
that this needs to be reset. All other information will be stored in memory
no matter how long the power outage.
1. Accessed by pressing
�����
2. Adjust hours with + or — buttons, AM/PM toggles at 12
3. Press ����
4. Adjust minutes with + or — buttons
5. Press
����
6. Adjust current day with + or — buttons
7. Press ���� to complete and return to normal operation
1. Accessed by pressing ���� and + button simultaneously
2. Adjust hardness using + or — buttons
3. Press ����
4. Adjust days between regenerations using + or — buttons
5. Press ����
6. Adjust time of regeneration hour with + or — buttons, AM/PM
toggles at 12.
7. Press ����
8. Adjust time of regeneration minutes with + or — buttons
9. Press ����
10. Turn alarm buzzer ON or OFF with + or — buttons
11. Press
����
to complete and return to normal operation.
DAYS TO A REGEN
GPM
3 8
CAPACITY REMAINING
GPM GAL
1600 8
FLOW RATE
GPM
8.0
TIME OF DAY MON
GPM
2:40 8
PM
PHONE NUMBER
DEALER NA
CURRENT DAY
SET
MON
TIME MINUTES
SET
TIME HOUR
SET
2:00
AM
2:00
AM
ALARM BUZZER
SET
ON
REGEN TIME MINUTES
SET
2:00
AM
REGEN TIME HOUR
SET
2:00
AM
DAYS BETWEEN REGEN
SET
6
WATER HARDNESS
SET
20
GR
Return to
General Display