6
again moves you the next setting
.
9. Exit:
The display should read:
E
E
x
x
i
i
t
t
The Exit cycle is the confirmation that tells the
unit the changes you have made are to be
accepted by the valve. If you are confident
about the changes you have made then press
the:
UP BUTTON
OR
DOWN BUTTON
to return to the service mode and burn in the
new settings.
If you want to return to the previous settings
wait for one minute without touching the
control panel and the valve will revert
automatically.
In order for these new settings to become
active, it is necessary to execute a
regeneration. Stepping through
regeneration manually or allowing it to
complete automatically will accomplish this.
Checking the Diagnostics
Diagnostic Mode (Viewing Only)
Press
UP BUTTON
and hold for 5 seconds.
The diagnostics menu will display beginning
with Regen days ago. Press
SCROLL BUTTON
to advance to each diagnostic. If no button is
pressed within 60 seconds, the display will
return back to the time of the day.
Regeneration Days Ago:
Displays how many days ago the unit last
regenerated.
In Service:
Displays how many days the control has been
in service.
Number of Regenerations:
Displays the number of regenerations that
have taken place since the control was
installed.
Total Volume:
Displays the total volume of water used since
installation.
Typical Installation
Содержание 2401 Series
Страница 1: ......
