7
1
Push in grey collet to release tubing.
2
Tubing is secured in.
Push tubing straight in as far as it will go.
Grey Collet
Tube
O-Ring
1
Pull tubing straight out.
2
To Attach Tubing
To Release Tubing
This product is outfitted with user friendly ‘Push In’ connectors.
Proper use of the connectors is shown in the diagrams.
It is most important that the tubing selected for use with these
connectors be of high quality, exact size and roundness, and with no
surface nicks or scratches. If it is necessary to cut the tubing, use a
plastic tubing cutter or sharp razor knife. Make a clean square cut.
Should a leak occur at a ‘Push-In’ connector, the cause is usually
defective tubing.
To Fix: •
Relieve pressure
• Release tubing
• Cut off at least 1/4” from end.
• Reattach tubing
• Confirm connection is leak free.
‘Push-In’ Tubing Connector
