2
Specifications
Feedwater
! Do not use this system on water that is microbiologically unsafe or of unknown quality
without adequate disinfection before or after the system. !
Minimum inlet pressure: 20 psig
Maximum outlet pressure: 125 psig
Minimum water temperature: 34 degrees F
Maximum water temperature: 110 degrees F
Power
Voltage: 120VAC
Frequency: 60Hz
Power consumption: 3 Watts Maximum
Installation
Location: Indoors (Protect from direct sunlight)
Minimum ambient temperature: 34 degrees F
Maximum ambient temperature: 122 degrees F
Salt Capacity
Cabinet models: 200lbs
Two-Tank models: 300lbs
Maximum Flow To Drain
WBP27, WBPT27 (0.90 ft3 resin) – rated drain flow during regeneration – 2.0 gpm
WBP35, WBPT35 (1.15 ft3 resin) – rated drain flow during regeneration – 2.0 gpm
WBPT48 (1.5 ft3 resin) – rated drain flow during regeneration – 2.4 gpm
WBPT60 (2.0 ft3 resin) – rated drain flow during regeneration – 4.0gpm
This unit conforms to ANSI/NSF-44 for specific performance claims as verified and substantiated by
test data.
