2
Overview
The TurfMaster irrigation iron filtration system has been designed to solve a common problem
in turf irrigation systems. When iron is present in raw water supplies, it can cause destructive
staining on concrete and other critical structures. Treating the supply of this water for iron can
be problematic due to the high volume of water used in an irrigation cycle, combined with the
difficulty of iron water treatment technology. The TurfMaster system overcomes both of these
challenges with the following features:
1.
Advanced controls allow customization to treat only irrigation zones with structures that
could be affected by iron staining. This greatly minimizes the volume of water treatment
needed, and allows for treatment focus on critical areas.
2.
TurfMaster utilizes a unique iron filtration technology that does not require the injection of
any chemicals, or require their use at all. The specialized media and system components
rely on only water and line pressure to clean the advanced filtration media, providing an
environmentally friendly and cost effective treatment solution.
Installation Instructions
1.
Identify installation location and place unit(s).
TurfMaster piping should be located on the exclusive service line to the irrigation system
(See Illustration 1).
IMPORTANT: there may not be any filters installed upstream of the
TurfMaster system, or insufficient water pressure may affect operational performance.
This system and installation must comply with federal, state, and local laws and regulations.
Illustration 1
