Water Ace WA62UP Скачать руководство пользователя страница 2

2

ALWAYS USE EXTREME CAUTION

  

maintaining this product!

Important Safety Instructions

Carefully read and follow all safety  

instructions in this manual and on pump. 
SAVE THESE INSTRUCTIONS – This manual 

contains important instructions that should be 

followed during installation, operation, and  

maintenance of the product.  

Save this manual for future reference.
Safety Labels 

 

         This is the safety alert symbol. When you 

see this symbol on your pump or in this manual, 

look for one of the following signal words and be 

alert to the potential for personal injury!
 

 

Indicates a hazard which, if 

not avoided, will result in death or serious injury.
 

 

Indicates a hazard which, 

if not avoided, could result in death or serious 

injury.
 

 

Indicates a hazard which, if 

not avoided, could result in minor or moderate 

injury.

NOTICE

 indicates practices not related to 

personal injury.
Keep safety labels in good condition. Replace 

missing or damaged safety labels.

General Safety
 

 

Risk of burns. Do not 

touch an operating motor. Motors are de-

signed to operate at high temperatures. To 

avoid burns when servicing pump, allow it to 

cool for 20 minutes after shut-down before 

handling.
Do not allow pump or any system compo-

nent to freeze. To do so will void warranty.
Pump water only with this pump.
Periodically inspect pump and system com-

ponents.
Wear safety glasses at all times when work-

ing on pumps.
 

 

Risk of explosion. Pump 

body may explode if used as a booster 

pump.

NOTE: Not recommended to use for drinking 

water

GENERAL SAFETY

STOP Before you start

Содержание WA62UP







Отзывы: