Watec WAT-910BD, Руководство по связи

Страница: 6 / 11

WAT-910BD SPI COMMUNICATION MANUAL(Digital Out)
2) CAMERA PARAMETER WRITE
SPI Write "data set" (send to camera MCU), Address: 0x082
*1: Parameter Value.
*2: Checksum (CS) specifies the lower 1 byte of the calculated value (C1 + C2 + ADR + DAT).
SPI Write "data set" (send to camera MCU), Address: 0x193
*1: Parameter Value.
*2: Checksum (CS) specifies the lower 1 byte of the calculated value (C1 + C2 + ADR + DAT).
SPI Read "data set" (camera MCU response)
*1: Parameter address lower byte. Same as SPI Write data.
*2: Paramwter value
*3: Check sum (lower byte of "ADR + DAT")
*4: ST CODE(AA:in execution 55:EXEC.NORMALLY A5:EXEC.ERROR)
Symbol ADR DAT CS ST
Value *1 *2 *3 *4
ST
Value 04 82 93 *1 *2 AA
Symbol C1 C2 ADR DAT CS
CS ST
Value 04 81 82 *1 *2 AA
Symbol C1 C2 ADR DAT
- 3 -