Dimensions (in millimeters):
Technical Specifications:
MODEL
Pick-up element
Number of pixels
Unit cell size
Sync. System
Scanning system
Video output
S/N Ratio
Electronic iris
Gamma characteristic
AGC
Power supply
Current
Storage temperature
Operating temperature
Weight
Specification of lens
Type
Focal length
F Point
Angular view (H
×
V)
°
Resolution (Horizontal)
Minimum Illumination
WAT-704R (EIA)
WAT-704R (CCIR)
1/4 inch Interline Transfer CCD image sensor
537(H)
×
505(V)
537(H)
×
597(V)
7.15
μ
m(H)
×
5.55
μ
m(V)
7.3
μ
m(H)
×
4.7
μ
m(V)
Inter nal
2:1 Interlace
1Vp-p 75 ohm
(
Unbalanced)
More than 46dB (AGC OFF)
1/60
〜
1/100,000 sec. 1/50
〜
1/100,000 sec.
Γ ≒
0.45
More than 18dbB
DC +9.0
〜
+9.9v
Max. 100mA
-30
℃ 〜
+70
℃
-10
℃〜
+40
℃
Approx. 25g 0.89oz (With G-3.8)
G-3.8
Glass
3.8mm
F 2.0
51
°
×
40
°
Over 380 TV lines (Center)
0.8 Lux
P-3.7
Pin hole
3.7mm
F 4.5
52
°
×
41
°
Over 350 TV lines (Center)
4 Lux
( Model G-3.8 ) (Model P-3.7)
Front View
Side View of type P-3.7
Lens
❉
We reserve the right to change the design and specifications without notice.
❉
Please direct further enquiries to the local dealer where you purchased your WAT-704R camera.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference,and
(2)this device must accept any interference received,including interference that may cause undesired
operation.
Important:
The camera mentioned above does not comply with this regulation, if it is modified at your disposal.
Address : 254-2, Nihonkoku, Daihoji, Tsuruoka-Shi, Yamagata-Ken, 997-0017 JAPAN.
Phone : +81-235-23-4400 Fax : +81-235-23-4409
http://www.watec.net
E-mail : [email protected]
Watec Co.,Ltd.
