13
3.2.
WHITE BALANCE
3.2.1.
WHITE BALANCE MODE (MODE)
Set the WHITE BALANCE control mode.
This setting is not applicable for the WAT-3500.
Default: ATW
Table 4. WHITE BALANCE - MODE
Menu
Item
Value
Description
MODE
ATW
Automatically follow WHITE BALANCE (Approx. 2000K-
15000K)
by matching the color temperature of a subject.
The range of color can follow is wider than the
INDOOR/OUTDOOR.
ONE PUSH
Fix WHITE BALANCE at the specific color temperature.
Combined use the WHITE BALANCE convergence
movement (PUSH).
Utilize the WHITE BALANCE convergence movement
(PUSH) to complete while imaging such as a white paper.
INDOOR
WHITE BALANCE automatically follows (Approx. 4600K-
7200K).
Set as easy to follow indoor light source (fluorescent light,
etc.).
OUTDOOR
WHITE BALANCE automatically follows (Approx. 4600K-
10000K).
Set as easy to follow outdoor light source (sunlight, etc.).
MANUAL
Manually set WHITE BALANCE.
3.2.2.
One Push Trigger (PUSH)
Complete the
WHITE BALANCE convergence movement while the WHITE
BALANCE mode is
ONE PUSH. The B and R gain value after completing PUSH
operation retains even when the power of the camera was turned off, or the
WHITE BALANCE mode was changed.
When the “3.7. FACTORY RESET” is completed, the B and R gain value after
completing PUSH operation will return to default settings.
