Watchguard SMS8RX, Инструкция по эксплуатации

Страница: 6 / 8

6
All of your individual wireless detectors (i.e. Wireless PIR, Wireless Reed, or Wireless Smoke
Detectors) can send a supervision report to your receiver to confirm that they are fully functional.
Supervision is always enabled, the receiver will be expecting to receive the individual supervision
code from each detector approximately every 2.4 hours i.e. at least 10 reports per day, per detector.
The SMS8RX only requires one report from each detector during the 24 hour period to satisfy the
supervision criteria. An extra 9 reports are still given to ensure that the supervision report is received.
If all 10 supervision reports are missed from one detector during the 24 hour time frame, then the
SMS8 keypad will display “SERVICE”. You then access the service menu and it will advise of a
‘Supervision’ failure on the particular zone.
Low battery signals will only be fixed by opening the detector to send a tamper signal to the
SMS8RX. Replace the old batteries with new ones and replace the detector cover.
Supervision signals will only be fixed by fixing the particular detector so that is able to transmit to the
SMS8RX.
Tamper and Zone alarms open the particular zone for 1 second. A restore will be sent 1 second after
the detector sends the trigger signal.
Your detectors will automatically transmit a low battery report to your SMS8RX receiver when the
batteries are nearly flat.
The low battery report code is also transmitted after the alarm code, every time a detector is
triggered.
After the individual detector has sent a low battery, the SMS8RX will display a ‘service’
message. After accessing the service menu it will display a ‘supervision’ fault for the particular
zone with a low battery.
Please note: Your SMS8RX identifies a different low battery code for
each individual detector. When you replace the batteries, your receiver will automatically see that
the low battery code is no longer being sent from that detector.
The tamper signal will display “SERVICE” on the SMS8 Keypad whenever the front case is
removed and the tamper switch is released on a Wireless PIR Detector or Wireless Reed Switch.