Watchguard Firebox X55E-W, Руководство по оборудованию

Страница: 21 / 26

Package Contents
Hardware Guide 21
Fail Over
The Fail Over indicator shows a WAN failover. The light
is green when there is a WAN failover from WAN1 to
WAN2. The light goes off when the external interface
connection goes back to WAN1.
Link
The link indicator shows a physical connection to a
trusted Ethernet interface. The trusted interfaces have
the numbers 0 through 2. The light comes on when
traffic goes through the related interface.
100
When a trusted network interface operates at 100
Mbps, the related 100 indicator light comes on. When
it operates at 10 Mbps, the indicator light does not
come on.
Status
The status indicator shows a management connection
to the Firebox X Edge e-Series. The light goes on when
you use your browser to connect to the Firebox X Edge
e-Series configuration pages. The light goes off a short
time after you close your browser.
Mode
The mode indicator shows the status of the external
network connection. The light comes on when the
Ethernet cable is correctly connected to the WAN1
interface. The light is green if the Firebox X Edge e-
Series can connect to the external network and send
traffic. The light flashes if the Firebox X Edge e-Series
cannot connect to the external network and send
traffic.
Attn
The Attn indicator lights when you reset the Firebox X
Edge e-Series to factory default settings.
Power
The power indicator shows that the Firebox X Edge
e-Series is on.